Hand Operated Drum Pump, Lever, Basic Pump with Spout, Max. Head – Pumps 3 ft.


$93.94

Compare

Product Details

Cleaning hand drum pumps are made of materials that withstand the potentially corrosive effects of cleaning products. They are used to dispense and transfer small volumes of soap, detergent, degreaser, wax, or other cleaning solutions used in janitorial and sanitation work.

Hand drum pumps are manually powered devices operated by a crank, lever, or other mechanism to draw fluids out of a container. They allow pumping where there’s no access to a power source and are ideal for dispensing and transferring small amounts of fluid. Sometimes called a manual or rotary drum pump, these hand-operated pumps connect to an adapter that allows the shaft of the pump to be mounted through the bung hole of a drum or other container.

Technical Specs

  • ItemHand Operated Drum Pump
  • Action TypeLever
  • Pump Package TypeBasic Pump with Spout
  • For Container Size30 gal., 55 gal.
  • For Container TypeDrum
  • Housing Material – Pumps304 Stainless Steel
  • Piston MaterialPTFE
  • Flow Rate12 oz. per stroke
  • Outlet Pressure5 psi
  • Viscosity650 cP
  • Operating Temp.35 Degrees F
  • Fluid Temp.140 Degrees F
  • Head – Pumps3 ft.
  • Head Pressure3 psi
  • Compatible ChemicalsAcetic Acid (Glacial), Acetic Acid 20%, Acetic Acid 80%, Chromic Acid 5%, Chromic Acid 30%, Chromic Acid 50%, Citric Acid 50%, Formic Acid, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Acetone, Methyl Ethyl Ketone (MEK), Ethyl (Ethanol), Isopropyl (Isopropanol), Methyl (Methanol), Antifreeze (Coolant), Ethylene Glycol, Glycerin, Calcium Chloride, Sodium Bicarbonate (10%), Cyclohexane, Gasoline, Heptane, Hexane, Kerosene, Stoddard Solvent (Mineral Spirits), Diesel Fuel, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Ethyl Acetate, Biodiesel, Formaldehyde 40%, Formaldehyde, Ammonium Hydroxide, Hydrazine, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Sodium Hypochlorite/Bleach (to 20%), Lacquer Thinners, Toluene, Xylene, Fresh Water, Salt Water, Deionized Water, Motor Oil, Methyl Chloride, Sodium Bisulfate, Sodium Bisulfite, Trichlorethylene (50%), DEF, E85, Anhydrous Ammonia, Ammonia (Liquids), Automatic Transmission Fluid, Brake Fluid, Fertilizers, Fungicides, Herbicides, Lithium Grease, Paint, Paint Thinner, Pesticides, Turpentine, Windshield Washer Fluid, Additional Chemicals (If needed by supplier)
  • Not Recommended ChemicalsHydrochloric/Muriatic Acid (100%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Phosphoric Acid (40% Solution), Sulfuric Acid (10% – 75%), Sulfuric Acid (75% – 100%)
  • Includes Discharge HoseNo
  • Discharge Tube Outlet ID3/4″
  • Discharge Tube Outlet OD7/8″
  • Includes Suction TubeYes
  • Suction Tube ID11/32″
  • Suction Tube OD1″
  • Suction Tube Length41″
  • Suction Tube MaterialStainless Steel
  • MeteredNo
  • Includes Bung AdapterYes
  • Bung Connection Dia.2″
  • Adapter Connection TypeMNPT
  • Adapter MaterialPolypropylene
  • Pump Connection ID1″
  • Includes NozzleNo
  • Includes SpoutYes
  • Spout Connection Size49/64″
  • Spout Length5″
  • Spout MaterialPVC
  • Power SourceHand Operated
  • Self-PrimingYes
  • Runs DryYes
  • Seal MaterialPTFE
  • Wetted Materials304 Stainless Steel, PTFE
  • For Use WithFor Viscous Liquids, Detergents, Most Acids, Oils, Waxes, Alkalis, Water, and Soaps
  • Height Above Container19-3/4″
  • FeaturesAll Stainless and PTFE Construction, Three Piece Intake Tube
  • Includes2″ Bung Adapter
  • Diesel Exhaust Fluid CompatibleYes
  • Food GradeNo
  • Agency ComplianceISO 22241-3
Category: